Plotter 1 insignia Making protos on Maui First plot with new table and Centroid acorn cnc Upgrade using Leadshine

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 2932
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Plotter 1 insignia Making protos on Maui First plot with new table and Centroid acorn cnc Upgrade using Leadshine

Post by cnckeith »

Kai just put this system together (machine and all) from a bunch of parts on the floor to a working HUGE plotter in less than a week!

When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply