It works!!!! Thanks for all your help.

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
puffin101
Posts: 7
Joined: Thu Feb 20, 2020 9:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

It works!!!! Thanks for all your help.

Post by puffin101 »

Here is a link to the photo album that has a video of the first cuts of the small mill Mach3 to Acorn conversion. It works!!!! Thanks for all your help.
https://photos.app.goo.gl/BTSrpjAuiLCtJEdx7
Top
cnckeith
Posts: 7287
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: It works!!!! Thanks for all your help.

Post by cnckeith »

cool looking little mill, thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Post Reply

Return to “Success Stories”