Attached are some pictures of the latest Router retrofit
6X12 " DMM Servos Acorn Control with pro license. 5HP Water cooled Spindle
Shown are first test cuts and some parts total Time start to finish about 4 1/2 days. Done on customers location. Machine is up running making parts.
I used the CNC4PC C86 Connector Board for Acorn to DMM While it was not without a few setup issues once I got everything set correctly it worked great. It use just one cat 5 wire from Acorn to DMM I will post pictures of the set up next week. Arturo was great and I want to thank Marty for his help figuring out some problems.
The individual letter were the first parts cut out on the machine and they came out great.
If anyone has any question please PM me or post on the Thread
New retrofit Success Acorn and DMM
Moderator: cnckeith
-
- Posts: 153
- Joined: Wed Sep 06, 2017 1:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7439
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: New retrofit Success Acorn and DMM
cool! thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html