New retrofit Success Acorn and DMM

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

New retrofit Success Acorn and DMM

Post by TheKitMill »

Attached are some pictures of the latest Router retrofit
6X12 " DMM Servos Acorn Control with pro license. 5HP Water cooled Spindle

Shown are first test cuts and some parts total Time start to finish about 4 1/2 days. Done on customers location. Machine is up running making parts.

I used the CNC4PC C86 Connector Board for Acorn to DMM While it was not without a few setup issues once I got everything set correctly it worked great. It use just one cat 5 wire from Acorn to DMM I will post pictures of the set up next week. Arturo was great and I want to thank Marty for his help figuring out some problems.

The individual letter were the first parts cut out on the machine and they came out great.
If anyone has any question please PM me or post on the Thread
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: New retrofit Success Acorn and DMM

Post by cnckeith »

cool! thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply