Atrump VMC Capabilities

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
oakes4501
Posts: 5
Joined: Thu Sep 12, 2019 11:20 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3423
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Atrump VMC Capabilities

Post by oakes4501 »

Just showing off some projects done on some older Atrump VMC's that use Centroid controls.
Attachments
100 Pounds Down To 6 Pounds
100 Pounds Down To 6 Pounds
Large Brittle Plastic Piece
Large Brittle Plastic Piece
Large Brittle Plastic Piece
Large Brittle Plastic Piece
Two Of Our ATrumps Making Parts
Two Of Our ATrumps Making Parts
Fairly Difficult Part With A Lot Of Material Removal
Fairly Difficult Part With A Lot Of Material Removal
Air Inlet For A Very Large Natural Gas Pumping Engine
Air Inlet For A Very Large Natural Gas Pumping Engine
Our First ATrump
Our First ATrump
Fairly Difficult Part With A Lot Of Material Removal
Fairly Difficult Part With A Lot Of Material Removal
Fairly Difficult Part With A Lot Of Material Removal
Fairly Difficult Part With A Lot Of Material Removal
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Atrump VMC Capabilities

Post by cnckeith »

Whoa! nice work..thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Sportbikeryder
Posts: 177
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 10583
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: North Carolina

Re: Atrump VMC Capabilities

Post by Sportbikeryder »

Looks great. I work with an older E320 bed mill with Centroid TRT-32 installed for cylinder head porting. The TRT is a double edged sword as it greatly increases position capability, but at the expense of rigidity. I still used it for quite a bit of our motorcycle parts. Even though the machine is without a tool changer, I think I need to figure out how to add an encoder and rigid tapping as hand tapping off of the machine is starting to get old.

John

79600614_2665070687038125_9048329244546957312_n.jpg
69572632_360446358234764_9063886994777571328_n.jpg
78364454_575159859963973_1663718254268383232_n.jpg
78868467_475528239744579_4560758237556637696_n.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Atrump VMC Capabilities

Post by martyscncgarage »

Nice Stuff!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Sportbikeryder
Posts: 177
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 10583
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: North Carolina

Re: Atrump VMC Capabilities

Post by Sportbikeryder »

Atrump parts look even better after a Hard Anodize :D
Anodized_methanol_components.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Atrump VMC Capabilities

Post by martyscncgarage »

Very nice. I just installed a Maximill E216 in my home shop. Super light use. Glad to have it....
Attachments
Maximill.jpg
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Atrump VMC Capabilities

Post by tblough »

Looks like I'm not the only one who had to cut a hole in the ceiling to fit in their machine ;-)
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Sportbikeryder
Posts: 177
Joined: Thu Jan 26, 2017 11:45 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 10583
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: Yes
Location: North Carolina

Re: Atrump VMC Capabilities

Post by Sportbikeryder »

Can even be used to test mechanical fuel pumps if needed ;-)
20200123_151819.jpg
20200123_151827.jpg
Post Reply