42” manual Kondia’s evolution to allinonedc
Moderator: cnckeith
-
- Posts: 21
- Joined: Fri Jun 14, 2019 10:10 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: a900749
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
42” manual Kondia’s evolution to allinonedc
Bought this used Kondia mill about twenty years ago to help keep things working on the ranch. I eventually wanted to upgrade it but retain manual use characteristics. I bought some old Anilam parts stripped off an old Bridgeport and began adapting things to my mill- except my machine is generally metric.... nothing quite fits and the ball screws were for a larger machine...
. so adapt!!!!
Last edited by warnerr on Mon Oct 21, 2019 9:33 pm, edited 2 times in total.
-
- Posts: 21
- Joined: Fri Jun 14, 2019 10:10 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: a900749
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 42” manual Kondia’s evolution
Machine worked but the electrics eventually failed... Centroid to the rescue! I have used original servos, power box, transformer and caps along with some cabling. Room runs out quickly in this cabinet! Boring the servos for a 6mm shaft for the new encoders was the most difficult setup. Managed to mill the yoke to fit using the mill on itself.
-
- Posts: 21
- Joined: Fri Jun 14, 2019 10:10 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: a900749
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 42” manual Kondia’s evolution to Allinonedc
Machine is up and running! The assembly manual is fantastic! I had only a couple minor issues that were expertly answered on the support forum.
-
- Posts: 7166
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: 42” manual Kondia’s evolution to allinonedc
wow! nice work! and thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html