Replaced a FANUC 5T with a Centroid T400 on big Flat Bed Lathe
Posted: Mon Oct 07, 2019 3:37 pm
Replaced a FANUC 5T with a Centroid T400 on big Flat Bed Lathe
Reused the old Fanuc/Gettys black cap servo motors and ran with the new Centroid AC/DC drives. Still have to make some cover plates for the operator panel, and fix spindle encoder , but machine is alive now after collecting cobwebs with the 5T control...
Reused the old Fanuc/Gettys black cap servo motors and ran with the new Centroid AC/DC drives. Still have to make some cover plates for the operator panel, and fix spindle encoder , but machine is alive now after collecting cobwebs with the 5T control...