Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board
Posted: Mon Oct 07, 2019 3:34 pm
Arrow Controls Devlieg Horizontal Retrofit - Took off an unfriendly Dynapath Control and put on a Centroid M400 using a OAK board, PLC1616ADD IO and reusing the existing Allen Bradley AC servo drives and AB DC spindle drive.
Finishing up on a retrofit using scale feedback. Initial testing showed axis had .002 to .0075 slop. After turning on and setting up scales we were positioning to less than .0002.
Finishing up on a retrofit using scale feedback. Initial testing showed axis had .002 to .0075 slop. After turning on and setting up scales we were positioning to less than .0002.