Prosthetic Shape Carver Acorn Retrofit
Posted: Thu Sep 19, 2019 8:22 pm
Hey guys.....
A current project on the crate and ready to go out the door. The machine, a "Carve Shape" brand from the 90's is used in the prosthetics industry to continuous rotary carve a foam billet to the shape of the receiver's limb. Limb is scanned and once the plug is cut, attachment products are molded over the plug for a perfect fit.
This was a good learning project that hopefully will do much good in the world. Enjoy:
A current project on the crate and ready to go out the door. The machine, a "Carve Shape" brand from the 90's is used in the prosthetics industry to continuous rotary carve a foam billet to the shape of the receiver's limb. Limb is scanned and once the plug is cut, attachment products are molded over the plug for a perfect fit.
This was a good learning project that hopefully will do much good in the world. Enjoy: