Acorn Plasma Build Motion test

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Acorn Plasma Build Motion test

Post by TheKitMill »

Acorn Plasma Build Motion test, Wiring the THC and New Plasma Power Supply Next

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Acorn Plasma Build Motion test

Post by martyscncgarage »

TheKitMill wrote: Wed Jul 03, 2019 6:15 pm Acorn Plasma Build Motion test, Wiring the THC and New Plasma Power Supply Next



https://www.youtube.com/watch?v=I6KPRCGlIxw&t=47s
Looks good so far, let's see the sparks fly!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn Plasma Build Motion test

Post by TheKitMill »

Hi Marty

No Sparks yet but here is an update. The Plasma lost it pilot Arc so its not doing what it needs to do to cut. It worked for about 15 minutes and then developed a problem The Plasma is being repaired but everything else is looking good. The Auto fill drain system works as designed. Windows update did kill my Ethernet port but I managed to get it working again. Another machine is in the works and ready for motors as soon as they arrive.

Thanks for your help

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Acorn Plasma Build Motion test

Post by martyscncgarage »

Awesome!
Can't wait to hear how you dial it all in when you get your machine back.
P.S. it's OK to narrate your video :D
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply