Not my first 3D carving...

Post your completed retrofits for the world to see.

Moderator: cnckeith

Sword
Posts: 182
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Not my first 3D carving...

Post by Sword »

Good to hear Todd!

I don't have a "Medium Detail" setting at the moment. Haven't come across that situation yet. Since my values for fine detail are basically "Maxed", you could take the pertinent values (like #221, 222, 226, and 227) and halve them compared to "Precision Router" and "Fine" and give it a try. #226 or W is the one that really seems to make a difference for the change in Z detail (which 3D consists of).

Most of what I do needs higher detail and a smaller radius ball nose, so I haven't tried loosening it up a bit. This one took 6.5 hours and is approx. 25" x 4.5" in the cut area. Just finished another one this week that took 14 hours with a 2mm ball nose (just for the finish pass).

Scott
Attachments
Count Your Blessings.jpg
todd432
Posts: 52
Joined: Fri Mar 30, 2018 8:59 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: MPU12 serial number: 74E18275EB48-0914181220

Re: Not my first 3D carving...

Post by todd432 »

That is just awesome Scott,
Nice design too.

Out of curiosity how do you charge for work?
I think I'll half your 3d settings and see what happens.
Thanks
Todd
Engineering Hell: Everything's right and nothing works.
:roll: If everything's right and nothing works, check your assumptions.
Sword
Posts: 182
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Not my first 3D carving...

Post by Sword »

"How do I charge".... Not enough! :lol: It's tough with this kind of stuff. If I charged a standard set amount for machine time, it would be too high for most of my customers in my region. I try to get a fair amount for computer time and finishing time/supplies and then whatever I think I can add on for machine time. While it's cutting, I can work on other things. I've kind of settled on so much per size of 3D and if it has text that needs to be filled. Many of them have been on customer supplied slabs too, so I take that into account. I don't have to go out and find pieces, just figure out how to put what they would like on theirs.

Here's the one that took 14 hours to run. This one did take some time to layout and get the waterfall sculpted to where I was satisfied with it.

Scott
Attachments
Mountain Waterfall Scene.jpg
Gary Campbell
Posts: 1423
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI
Contact:

Re: Not my first 3D carving...

Post by Gary Campbell »

This Info on smoothing settings should not get buried! :)
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
cnckeith
Posts: 2993
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Not my first 3D carving...

Post by cnckeith »

i copied thread to the tech tips forum so it won't get buried. viewtopic.php?f=63&t=4580
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Sword
Posts: 182
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Not my first 3D carving...

Post by Sword »

Here are a few more 3D Christmas orders and a couple of little lasered log cut offs using the beta release with PWM control for lasers. Just purchased the deer family model and it has some real nice detail! Had to flatten it a little for the thickness of the board, but it still kept nice detail. It was cut with a 1mm tapered ballnose and took 5 hours. It's approx. 6" x 11.5" x 0.6875" Will be running that one again on a larger scale for sure.

Scott
Attachments
IMG_20201223_111810.jpg
IMG_20201223_111756.jpg
IMG_20201223_111743.jpg
IMG_20201223_110812.jpg
IMG_20201218_121039.jpg
IMG_20201210_110744.jpg
terrymcc
Posts: 61
Joined: Fri Nov 27, 2020 11:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: waiting on delivery
Location: Pattison, TX
Contact:

Re: Not my first 3D carving...

Post by terrymcc »

Beautiful work!

How is the log cut? I thought it was just an angled slice, by t that wouldn’t yield bark at n both sides.
Sword
Posts: 182
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Not my first 3D carving...

Post by Sword »

Thanks. They're about a 45º slice. Bark angling up on one end and down on the other.
cnckeith
Posts: 2993
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Not my first 3D carving...

Post by cnckeith »

nice work!! thanks for posting. k
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply