First 3D Carvings

Post your completed retrofits for the world to see.

Moderator: cnckeith

martyscncgarage
Posts: 6646
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First 3D Carvings

Post by martyscncgarage »

Very cool! Thank you for sharing your experience!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
todd432
Posts: 52
Joined: Fri Mar 30, 2018 8:59 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: MPU12 serial number: 74E18275EB48-0914181220

Re: First 3D Carvings

Post by todd432 »

Hi All
I got the flag done, haven't given it to him yet.
Here are the finished pics, 3 coats semi gloss poly ,a alum french cleat to hang it with.
and a torched accent.
I also put 2 recessed magnets on the back of the badge and flag to hold the badge to the flag

The flag is made from a left over chunk of an LVL beam (laminated veneer lumber ).
Ripped to 1/2 x 1 1/2 strips

Todd
Attachments
20201016_134518.jpg
20201016_134327.jpg
20201011_124249.jpg
Engineering Hell: Everything's right and nothing works.
:roll: If everything's right and nothing works, check your assumptions.
martyscncgarage
Posts: 6646
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: First 3D Carvings

Post by martyscncgarage »

Nice!
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply