Centroid and MakerCNC

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
george1963
Posts: 11
Joined: Fri Dec 08, 2017 12:26 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Centroid and MakerCNC

Post by george1963 »

cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Centroid and MakerCNC

Post by cnckeith »

nice thanks for posting! can you share some of the details of your build? what type of axis motors and drives, how you have them wired and what settings you have used. etc. this would help out other folks working on similar projects. thanks, Keith
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply