Centriod Makes First Part for '58 Chevy Truck project

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
rickwjenn
Posts: 34
Joined: Sat Jul 14, 2018 3:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 38D26975C27C-0621181008
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Centriod Makes First Part for '58 Chevy Truck project

Post by rickwjenn »

Been getting familiar with my PM-940CNC with the acorn controller...

Finally took a part for my dad's Truck project from Fusion 360 design to finished part. This is a clamping bracket for a 2.25 inch diameter street rod power steering actuator on my dad's 58 Chevy truck. The existing clamp is very weak and flexes under turning load - this one will keep it stationary or crush it :) Ending up just writing a G-code program for the various machining steps this time..







Attachments
Truck_Bracket_Final.PNG
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Centriod Makes First Part for '58 Chevy Truck project

Post by cnckeith »

nice thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply