Thanks for the reply. As you can see, I am pretty much desperate to get some sort of answer to my plight.
So basically, it is like milling a part rather than an actual plasma burn? I run mostly 16 ga, sheet stock for my projects, up to 3/16", so THC is pretty much essential. I am looking into Proma THC, and also capacitive sensing THC, but no decisions made as of yet.. Neutron never answered back both of my tech emails, so they are out.
Oh-btw, what is OHMIC?
CNC PLASMA BUILD
Moderator: cnckeith
-
- Posts: 8
- Joined: Sun Feb 24, 2019 10:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 8
- Joined: Sun Feb 24, 2019 10:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: CNC PLASMA BUILD
I wonder if I can ask you where the plasma trigger is located in the G code you posted? How did you accomplish this with the Acorn board? My machine is a Thermal Dynamics Cutmaster 101, and I have a built in trigger that the previous system used for firing the torch. Is this sequence done through Sheetcam? Please let me know. And thanks again for your help.
J.
J.
-
- Posts: 57
- Joined: Mon Jan 22, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clifton Illinois
Re: CNC PLASMA BUILD
I use M3 to turn on the relay for the plasma and M5 to turn it off.jeanmetalman1 wrote: ↑Tue Feb 26, 2019 4:57 am I wonder if I can ask you where the plasma trigger is located in the G code you posted? How did you accomplish this with the Acorn board? My machine is a Thermal Dynamics Cutmaster 101, and I have a built in trigger that the previous system used for firing the torch. Is this sequence done through Sheetcam? Please let me know. And thanks again for your help.
J.
I don't use sheetcam but M3/M5 should be the default for the plasma torch on/off.
-
- Posts: 8
- Joined: Sun Feb 24, 2019 10:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: CNC PLASMA BUILD
So if you are not using SheetCam, are you plotting your parts with a cad system, saving the DXF, then manually entering your M3/5 points? Sorry to be redundant, just trying to get a better idea as to how you are going about things. I mostly trace bit maps of JPEG images, and will use SheetCam to generate my tool paths, sort of speak. Thanks again for your help.
J.
J.
-
- Posts: 57
- Joined: Mon Jan 22, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clifton Illinois
Re: CNC PLASMA BUILD
I am using Fusion360 to generate the gcode. I wrote a post specific to my setup.jeanmetalman1 wrote: ↑Wed Feb 27, 2019 11:45 am So if you are not using SheetCam, are you plotting your parts with a cad system, saving the DXF, then manually entering your M3/5 points? Sorry to be redundant, just trying to get a better idea as to how you are going about things. I mostly trace bit maps of JPEG images, and will use SheetCam to generate my tool paths, sort of speak. Thanks again for your help.
J.
Uploading a quick video now..