Rigid tapping accomplished on my milll

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
axmem
Posts: 8
Joined: Mon Feb 19, 2018 1:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: MILL 38D2693D0B0-0110180508 LATHE 38D2694DA013-0321180756
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Contact:

Rigid tapping accomplished on my milll

Post by axmem »

Video link bellow thank you Centroid

frijoli
Posts: 595
Joined: Tue Sep 12, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090099
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Outside Winston-Salem, NC
Contact:

Re: Rigid tapping accomplished on my milll

Post by frijoli »

Very nice video!
Clay
near Winston-Salem, NC
unofficial ACORN fb group https://www.facebook.com/groups/897054597120437/
Reedfirst
Posts: 168
Joined: Wed Aug 09, 2017 1:02 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Boynton Beach, Florida

Re: Rigid tapping accomplished on my milll

Post by Reedfirst »

Nice work!

I'm still working out how to mount an encoder to a bridgeport....
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Rigid tapping accomplished on my milll

Post by cnckeith »

nice! thanks for posting. I shared on our facebook page here. https://www.facebook.com/centroidcnc/
I noticed you were using notepad for g code editing.. check out Notepad++ and cofigure it for G code editing..much better!
http://www.centroidcnc.com/dealersuppor ... ds/294.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply