Pictures are worth a thousand words! Yes, upload the .stl file with the pictures.tkbot47 wrote: ↑Wed Mar 18, 2020 3:02 pm Forgot to mention: One of the other things I did was to modify the original SB dust shoe. I essentially cut the shoe in half to remove the bottom part with the brush. I then made a custom bottom piece on my 3D printer from PETG plastic, and attach it with rare earth magnets, using the original skirt. I now can pop it off to mount a tool or clean it with no problem. The shoe is still adjustable up and down as the original design allowed. I''d be glad to share that design STL file if there's interest.
Tom
Marty