Not my first 3D carving...

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
CentroidFrog
Posts: 29
Joined: Wed Jan 29, 2025 9:39 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Not my first 3D carving...

Post by CentroidFrog »

That's incredible! The amount of detail you're able to get on each piece blows me away.
Sword wrote: ↑Sun Sep 08, 2024 1:20 pm Continuing the 3D saga, something that's been on my "honeydo" list for a while. You don't need a lathe or indexer to turn a bowl! ;)
Cut from a 2"+ thick chunk of soft maple slab wood that's been drying for several years behind the wood furnace.

Want to post your own question?
Check this out first: http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Acorn CNC tech tips: viewforum.php?f=63
Acorn CNC tech tip videos: viewforum.php?f=61

Top
Post Reply

Return to “Success Stories”