M400 on Dekel Maho DMU-80

Post your completed retrofits for the world to see.

Moderator: cnckeith

Post Reply
aamir
Posts: 52
Joined: Fri Jun 10, 2011 8:31 am
Allin1DC CNC Controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

M400 on Dekel Maho DMU-80

Post by aamir »

Hello Guys
Recently completed Dekel DMU-80 .

For professional retrofit ,consultancy and services contact me
aamirzaheer4@yahoo.com
Aamir Zaheer
cnckeith
Posts: 4646
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: M400 on Dekel Maho DMU-80

Post by cnckeith »

nice thanks for posting the video!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
toolmaker101
Posts: 56
Joined: Tue Dec 26, 2017 11:16 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: 102978, 8121, REV233

Re: M400 on Dekel Maho DMU-80

Post by toolmaker101 »

that great!!!
Post Reply