my latest CNCPC build for those times when you want speed on the cheap.

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cnckeith
Posts: 3223
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

my latest CNCPC build for those times when you want speed on the cheap.

Post by cnckeith »

my latest CNCPC build for those times when you want speed on the cheap.

Motherboard
https://www.newegg.com/Product/Product. ... 6813119137

CPU
https://www.newegg.com/Product/Product. ... 6819113481

Ram
https://www.newegg.com/Product/Product. ... 6820231959


You can run a M.2 SSD or a SATA SSD your choice i only used Samsung or Intel SSD's.

128 gb m.2's are around $40
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
converterking
Posts: 121
Joined: Fri Mar 19, 2010 2:38 pm

Re: my latest CNCPC build for those times when you want speed on the cheap.

Post by converterking »

Are you more concerned with single thread or multi thread performance? If it is single thread this could be a good choice.
https://www.cdw.com/product/Intel-Penti ... 6107704282!
tpetricek
Posts: 10
Joined: Thu Jan 24, 2019 5:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA7F72E1-1119181356

Re: my latest CNCPC build for those times when you want speed on the cheap.

Post by tpetricek »

Steal of a deal for a short time. i3-8100, 8gb RAM, 1TB HDD and Win 10. Full tower for $299!

https://www.newegg.com/Product/Product. ... gnorebbr=1
AcornJosh
Posts: 61
Joined: Tue Apr 17, 2018 8:58 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: my latest CNCPC build for those times when you want speed on the cheap.

Post by AcornJosh »

I actually have a Ryzen 2200G in my personal computer. For the money, its one of the best processors around. The built in Vega graphics will even handle modern games at medium settings and modest resolution.
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
cnckeith
Posts: 3223
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: my latest CNCPC build for those times when you want speed on the cheap.

Post by cnckeith »

cnc12 running smoothing with short vector 3D gcode likes the highest single core thread benchmark you can afford.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply