Search found 7348 matches
- Fri Jul 31, 2015 9:17 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Ajax DM45NC Mill
- Replies: 20
- Views: 11039
Re: Ajax DM45NC Mill
try with the saddle flush with the bed. if you look in the software travel limits section of the cnc software..that would be a big hint as to where the home position is set to. if the Y axis travel limit is set to a negative number..then i would suspect that the home position would be the saddle flu...
- Mon Jul 27, 2015 2:39 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Ajax DM45NC Mill
- Replies: 20
- Views: 11039
Re: Ajax DM45NC Mill
machine home is not part zero, the DRO is telling you how far away from part zero the machine is sitting at. also called a "Work Coordinate"
- Thu Jul 09, 2015 7:47 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Depth setups in Z? Newb w/ a fowler Z depth height
- Replies: 3
- Views: 3286
Re: Depth setups in Z? Newb w/ a fowler Z depth height
hello. i'm wondering how you are using the tool library... are touching off each tool every time for each new program? (a common newbie misunderstanding) or are you following the tool library method taught in the training videos? since if you follow that method..it minimizes tool touch off's..etc.. ...
- Wed May 13, 2015 4:38 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Encoder Basics
- Replies: 66
- Views: 183716
Re: Encoder Basics
check this new webpage out..SEM DC Servo Motor Encoder Retrofit Upgrade, preparing the servo for the new CNC control. Step by step pictorial guide to installing a new Rotary Encoder and direct wire power and encoder cable on a 20 year old DC servo motor for use with a new Centroid CNC control. http:...
- Fri May 01, 2015 11:11 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Warmup cycle?
- Replies: 2
- Views: 2432
Re: Warmup cycle?
that's pretty easy to write yourself:-)... bit of advice Double check that your lube pump is working properly.. check the lube pump itself and the settings in CNC11 (there are lots of options on how to configure a lube pump depending on the type you have etc.) and check each lube line outlet to make...
- Wed Apr 29, 2015 3:09 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Centroid M-15
- Replies: 29
- Views: 12368
Re: Centroid M-15
Woody, Hello. Do the LED's on the operators console lit up? A blank LCD screen could be a number of issues. 1.) PC isn't booting - check PC power supply, a common cause of PC not booting is the power supply quit 2.) LCD screen back light is out -plug in a VGA monitor and turn the machine on and see ...
- Wed Apr 22, 2015 10:53 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: CNC11- Any way to put up Graph when part cutting?
- Replies: 1
- Views: 2290
Re: CNC11- Any way to put up Graph when part cutting?
yep... its called Run Time Graphics. in the "Run" menu select RTG to turn it on.. now when you press cycle start you'll see the graphics while you are running a job. you can also switch back and forth from graphics to g code on the fly. be sure to have your tool diameters set properly for ...
- Wed Feb 18, 2015 3:41 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +5V supply for Servo encoders & DB-9 pin Q.
- Replies: 3
- Views: 2850
Re: +5V supply for Servo encoders & DB-9 pin Q.
be sure to check out the photo slide show at the bottom of this page, great complement to the encoder hookup information that is in the Allin1DC installation manual.
http://www.centroidcnc.com/sem_dc_servo ... rofit.html
http://www.centroidcnc.com/sem_dc_servo ... rofit.html
- Wed Feb 18, 2015 3:12 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +5V supply for Servo encoders & DB-9 pin Q.
- Replies: 3
- Views: 2850
Re: +5V supply for Servo encoders & DB-9 pin Q.
Jeff,
hello. the +5 vdc for the encoders is supplied by the Allin1DC.
connect the encoder wires to the db9 as per the install manual diagram and plug it into the Allin1DC and you are done! -Keith
hello. the +5 vdc for the encoders is supplied by the Allin1DC.
connect the encoder wires to the db9 as per the install manual diagram and plug it into the Allin1DC and you are done! -Keith
- Wed Feb 04, 2015 4:19 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Quick dumb question on a linear scale.
- Replies: 2
- Views: 2607
Re: Quick dumb question on a linear scale.
you'll need a scale that has differential quadrature output A A- B B- Z Z -
from the all in one DC install manual page 13.
fyi.. http://www.zsinstruments.com/ makes a nice scale and they will preconfigure the cable db9 connector to match ajax/centroid.. so its plug and play.
from the all in one DC install manual page 13.
fyi.. http://www.zsinstruments.com/ makes a nice scale and they will preconfigure the cable db9 connector to match ajax/centroid.. so its plug and play.