Search found 3097 matches
- Thu Apr 04, 2024 6:59 am
- Forum: Centroid Acorn CNC Controller
- Topic: Can't add negative number to Low Range Spindle Speed RatioRatio <milling machine as a lathe, resolved>
- Replies: 47
- Views: 1093
Re: Can't add negative number to Low Range Spindle Speed RatioRatio
Spindle speed encoder output is supposed to be the actual spindle speed and does not get changed by the back gear ratio. As Keith pointed out earlier, if you have a Bridgeport style milling head and you attached the encoder to the top of the spindle, then you are not reading the actual spindle speed...
- Wed Apr 03, 2024 12:33 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Pro license binding and demo version
- Replies: 14
- Views: 454
Re: Pro license binding and demo version
All Centroid licenses are bound to the Centroid controller, not the PC. You can change PCs, and PC components, as often as you want.
- Sun Mar 31, 2024 6:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Recommendations for PC to run p.m. 940 conversion
- Replies: 189
- Views: 22669
Re: Recommendations for PC to run p.m. 940 conversion
My personal preference - silicone waterproof with a track pad and full numeric keypad
https://www.wetkeys.com/Touchpad-Plus-W ... 06t-bk.htm
https://www.wetkeys.com/Touchpad-Plus-W ... 06t-bk.htm
- Sun Mar 31, 2024 6:56 am
- Forum: Centroid Acorn CNC Controller
- Topic: Can't add negative number to Low Range Spindle Speed RatioRatio <milling machine as a lathe, resolved>
- Replies: 47
- Views: 1093
Re: Can't add negative number to Low Range Spindle Speed RatioRatio
@PhilipTrueman, you should start your own thread instead of hijacking someone else's. From the manual: 13.21 M41, M42, M43 - Select Spindle Gear Range (Macros) M41, M42, and M43 have no default actions, and therefore custom macros must be defined for these M codes in order to make this feature work....
- Fri Mar 29, 2024 6:44 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: CNC lathe Dealing with long chips
- Replies: 3
- Views: 268
Re: CNC lathe Dealing with long chips
Increase the feedrate or the depth of cut to make chips break.
- Thu Mar 28, 2024 7:08 am
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: CNCEST 3040T Z drive issues
- Replies: 1
- Views: 114
Re: CNCEST 3040T Z drive issues
Well, since you posted in the Centroid CNC forum, you are halfway to a solution. The next part of the fix is here: https://centroidcnc.com/
- Mon Mar 25, 2024 9:29 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Encoder Issue
- Replies: 3
- Views: 149
Re: Encoder Issue
Could be a bad encoder. Could be a slipping coupling. Could be a bad electrical connection. Could be a bad power supply. Could be a bad encoder port.
- Mon Mar 25, 2024 5:26 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Does this kind of wired MPG work with Acorn?
- Replies: 20
- Views: 689
Re: Does this kind of wired MPG work with Acorn?
Or, you can switch to an Acorn6 that has multiple encoder inputs.
- Mon Mar 25, 2024 4:43 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Move to different hardware
- Replies: 13
- Views: 430
Re: Move to different hardware
You'll have to set your Ethernet adapter fixed IP address as well.
- Mon Mar 25, 2024 7:11 am
- Forum: Centroid Acorn CNC Controller
- Topic: Move to different hardware
- Replies: 13
- Views: 430
Re: Move to different hardware
The easiest way is to just copy the CNCT and Intercon directories from the old drive to the new one. No need to reinstall anything or restore reports. Be sure to run the tuner and check for communication errors.