Centroid Community CNC Support Forum

Video Link toe ATC in motion

https://photos.google.com/share/AF1QipP ... ZYQUlhU2xR

To all out there. I have the Carousel working and anyone is welcome to ask me questions. 1) I have one issue with the tool counter sensor, The led on the acorn goes on and off but the Alt I I/O skips tools. How do i fix this?? 2) I will like to have the light Auxkey torn my OUT43 on and off It is di...

Hello AllIn1Chris and cncKeith Thank you for the help. I have gone through the ATC Wizard setup with the new advise and This is the outcome. fixedcarouselpositions.cnc fixedcarouselpositions.cnc Do you thing that this will work? Other Notes and photos ATC Door Sensor.jpeg Input Definitions.png Outpu...

Hello All; I am using CNC12 5.08 Attempting to install the ATC, I run into a problem with the wizard ATC Setup. It lists the tool change y Value, Distance and direction to clear and Clearing Axis. My Carousel is attached to the gantry (Y Axis), there should no be any value for the y axis otherwise i...

Hello cncKeith; I never used the carousel I changed the tools manually. Everything else worked great. I have the carousel turning Forward and Reverse after working on it all day the tool count sensor is still skipping. the 8 tool bolts (5/16) that the sensor scans over the tip could be to small ?? I...

https://photos.app.goo.gl/VLB4nU8YoEVEwdBf8 Hello CNCKeith I attached the report and a link to the photos. The carousel works with forward and Reverse output relays 40-41 I am in the process to add a homing sensor to the carousel and a tool count sensor. The tool count sensor seems to skip tools ( d...

Hello All and CNCKeith I am finally back and setting up the AXYZ 4008 8 tool ATC. I knew more before than I do now, if you don't do this all the time it gets frustrating. I installed the latest version and updated all the I/O and settings , now I need help for the ATC. this ATC does not move, it onl...

Thank you cncsnw; I have a Fryer 2000. The computer is not working, and I hope everything else is. It has: Yaskawa SGDB-10ADG for the z Axis, Yaskawa SGDA-08AP on the X axis, a Yaskawa CIMR-V7AU23P7 5HP spindle driver, two Yaskawa servo motors and a 5HP Spindle motor I am assuming that with the exce...

May I ask which route did you take to rebuild your Fryer 2000