Search found 7434 matches
- Thu May 16, 2024 6:10 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Analog Out weirdness, please help <DYN4 as spindle motor>
- Replies: 35
- Views: 494
Re: Analog Out weirdness, please help <DYN4 as spindle motor>
i think others have tired with the DYN4 as spindle motor and gave up and went with other solutions that have been proven to work.
- Thu May 16, 2024 3:21 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Rough Motion on Circular Toolpaths
- Replies: 26
- Views: 395
Re: Rough Motion on Circular Toolpaths
need much more info to help you, this is machine related, either mechanical or motor resolution (electronic or mechanical or both)
please read the tech support request posting guidelines.
need photos of the machine, lots of them.
and a fresh report.zip
otherwise we are all just guessing.
please read the tech support request posting guidelines.
need photos of the machine, lots of them.
and a fresh report.zip
otherwise we are all just guessing.
- Wed May 15, 2024 2:13 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Axis motion after electronics moved to new enclosure
- Replies: 20
- Views: 411
Re: Axis motion after electronics moved to new enclosure
The machine has a Left Y axes and a Right Y axes that are paired. When I push Y- on the VCP, the right and left Y axis moves in the correct direction (Y-) together. When I push Y+ on the VCP, the right axis moves in the correct direction (Y+) but the left moves in the Y- direction. The X and Z axis...
- Wed May 15, 2024 2:11 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Introduction video to using Notepad ++ and the NCnetic G code editing plugin.
- Replies: 9
- Views: 280
Re: Introduction video to using Notepad ++ and the NCnetic G code editing plugin.
Hi, There is a problem with the 1.30 PC Tuner installing the NCnetic plugin for Notepad++. The PC Tuner only looks for a Notepad++ installation on the C: drive. If Notepad++ is installed on a different drive, the PC Tuner is unable to located the installation. Otherwise the NCnetic plugin is very n...
- Wed May 15, 2024 1:55 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 74
- Views: 39163
Re: Dxf
no. you can use the cad system to break up the poly radius arcs into either 1.) small lines, 2.) real arcs. if you want to use Intercon. otherwise use a CAD/CAM system. i would recommend Vectric Cut 2D for this kind of work, it is similar to Intercon in many regards but, is CAD based and will accept...
- Tue May 14, 2024 7:48 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 74
- Views: 39163
Re: Dxf
i edited your dxf and changed three of the poly arcs with real arcs
- Tue May 14, 2024 7:43 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: Dxf
- Replies: 74
- Views: 39163
Re: Dxf
Why do you want to import dxf if you have the model in fusion? Postprocessor for Centroid in fusion is very good. Uwe Mon but est d'utiliser un maximum intercom C'est tellement simple d'utilisation Imaginons que ma poche est trop petite En deux temps trois mouvements j'ai modifié mes cotations Et s...
- Tue May 14, 2024 6:43 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 Router Restructure Beta Software thread.
- Replies: 3
- Views: 194
Re: CNC12 Router Restructure Beta Software thread.
and we will add a similar rectangular box for the work envelope in addition to being able to show the machine travel limits.
- Tue May 14, 2024 6:41 pm
- Forum: Public Beta CNC Software Testing, Discussion and Feedback
- Topic: CNC12 Router Restructure Beta Software thread.
- Replies: 3
- Views: 194
CNC12 Router Restructure Beta Software thread.
We've been working on tailoring CNC12 Router to better fit a typical CNC Router Operators work flow. This 'remodel' of CNC12 Router will be released initially as CNC12 v5.18 for Acorn only. The remodel largely consists of restructuring the CNC12 menus for Router work and adding many new built-in can...
- Tue May 14, 2024 5:30 pm
- Forum: Centroid Hickory CNC Controller
- Topic: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
- Replies: 13
- Views: 1157
Re: Kitamura Mycenter Zero - DELTA Ethercat Retrofit
good to hear. They use it in automotive for a reason i suspect. The bad thing is it can't transfer as much torque as an equivalent "normal belt", s you might need a wider one to accommodate for it. Good that mine has room for a 60mm belt. From the quick data i could find, that should be g...