Centroid Community CNC Support Forum

Need confirmation for this one,, spindle foward and spindle reverse,,which input should i connect,,
WWW.megmeet-drivetech.com

Hi guys, the problem i, where the connetion for the spindle encoder should i hook , to the servo driver or to the acorn board,, anyone has done it before?
And,Need some clarification from the expert,, which one should i connect spin foward and reverse to this pin from op4 and op5 at the acorn board,

WWW.megmeet-drivetech.com
Servo drive website

Yes, the fan is 230v thanks for the advised,, and another thing is,, i bought a servo drive, dont know or not sure how to connect it,, afraid ,, my spindle has encoder on it,, where should I connect it, is it to the servo drive or to acorn board,

You are in luck. This looks like standard HSD pinout/connectors. This should help. Assuming the connectors look like the picture you have i would just buy the HSD premade cables. They are proper flex cable. The only things to keep in mind: If the fan is 230v great, they work out great (the power ca...

dear Danny B
what it mean pin no 3 and n0 9,, is that to provide two hot wire? or what?

So in oder to check tool is act as check tool is, running the g code from c drive,, not from usb,, is that? Because i have try to use the tool check function before, and it stop the program,, then i stop using that function,,

Thanks for the info,, i am newbe,

Thanks marty,, it is my dumb foult in this,, i set the part zero on the wrong spot,, consider this post is done,, thanks again,,