Search found 54 matches
- Wed Jun 23, 2021 8:14 pm
- Forum: Centroid Acorn CNC Controller
- Topic: x axis travel exceeded
- Replies: 8
- Views: 2552
Re: x axis travel exceeded
I'm a serious newbie so this might be really dumb, however, you're at +1.95 X in your current WCS but your machine coordinates are saying you're only at +1.292 X from your homed X. IE in order for your machine to actually go to X0, it would have to violate your X limits by about 0.7". Hence the...
- Wed Jun 23, 2021 7:30 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Show me your Custom VCP's!
- Replies: 280
- Views: 250143
Re: Show me your Custom VCP's!
Just got done with a bunch of cleanup in my VCP, router mill here, and got rid of a bunch of stuff I never use, plus reorganizing. Some specifics: Added dedicated buttons for setting 0 on X, Y, Z, XY, and XYZ. Added spindle warm-up button and macro Set Axis Paired button to nearly same color as back...
- Tue Jun 22, 2021 11:56 am
- Forum: Centroid Acorn CNC Controller
- Topic: VCP design - too much?
- Replies: 7
- Views: 3025
Re: VCP design - too much?
Honestly I find it low on the legibility scale, partially because of the low contrast in some places, and also because of the gradients that "fade" the button into the background. Also the "vacuum on" button is probably a finger width from the "play" button, which seems...
- Tue Jun 08, 2021 1:47 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Repeatedly get "X axis home not set" while trying to reset home <resolved>
- Replies: 7
- Views: 2640
Re: Repeatedly get "X axis home not set" while trying to reset home <resolved>
I see that now in the master Centroid Mill manual. Still pretty new at this and missed that some M-numbers are reserved even if there is no existing mfuncXX file to match it. Thanks for that info, and that explains my problems!
- Thu Jun 03, 2021 9:14 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Repeatedly get "X axis home not set" while trying to reset home <resolved>
- Replies: 7
- Views: 2640
Re: Repeatedly get "X axis home not set" while trying to reset home
okay, well I fixed it though I'm not sure what broke it to begin with. I restored the files and a report from right before I messed with all of this and noticed that it still exhibited the error mentioned above. This should not be given that all of the settings were reset. But I noticed that because...
- Thu Jun 03, 2021 12:46 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Repeatedly get "X axis home not set" while trying to reset home <resolved>
- Replies: 7
- Views: 2640
Re: Repeatedly get "X axis home not set" while trying to reset home
Yep, that's part of my next step. I changed buttons around, added a few new macros for homing individual axis, and mapped them. Nothing that directly touched the "homing" macro but obviously something did, tangentially. Unless somebody has a better idea, will back out to my last report and...
- Wed Jun 02, 2021 10:50 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Repeatedly get "X axis home not set" while trying to reset home <resolved>
- Replies: 7
- Views: 2640
Re: Repeatedly get "X axis home not set" while trying to reset home
Not easily. Also then what? Feels like it would be good to learn what happened here so it doesn't happen again. IE I can't find the problem but would love to learn from someone who can!
- Wed Jun 02, 2021 9:53 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Repeatedly get "X axis home not set" while trying to reset home <resolved>
- Replies: 7
- Views: 2640
Repeatedly get "X axis home not set" while trying to reset home <resolved>
Machine has been working well for over a year with no hardware changes and decided to do a bunch of work with a custom VCP configuration. All went well but then noticed my "reset home" function no longer works properly. It immediately complains that the X axis home is not set (see screen s...
- Fri May 07, 2021 12:33 pm
- Forum: Centroid Acorn CNC Controller
- Topic: "Zero XY" macro? <answered>
- Replies: 4
- Views: 1453
Re: "Zero XY" macro?
Big help, ShawnM! Thank you!
- Thu May 06, 2021 7:54 pm
- Forum: Centroid Acorn CNC Controller
- Topic: "Zero XY" macro? <answered>
- Replies: 4
- Views: 1453
Re: "Zero XY" macro?
The complexity of the existing macros made me think this was more complicated. Thanks, Gary