Centroid Community CNC Support Forum

Hi Keith - That is good info, I was under the assumption that was a no-no. That will give me something to work on. I wish there was an upgrade option for just the probing cycles. I have no use or desire to digitize anything. Full probing cycles for $49 sounds good to me :) hello. fyi.. just because ...

I wish there was an upgrade option for just the probing cycles. I have no use or desire to digitize anything. Full probing cycles for $49 sounds good to me

MDI

G0 Z0

This will rapid to Z0. I would advise to do this without a tool, so you know whats going to happen.

Very interesting. Def. following this thread.

I have returned to report the issue and solution. After initially having the problem with the machine randomly stuttering, I went through a ton of problem solving methods - adding another fan blowing on a heatsink that I added to the Gecko 540, putting the Acorn further away from the Gecko 540 as to...

Thank you very next much! For anyone else interested, the M3 does not have any delay. Here is the modification to the M3 that I made to add a 10 second delay. ;------- ;M3 macro ; Displays message to select auto spindle mode if it is not set ;------- IF #4202 || #4201 THEN GOTO 200 M95 /2 M94 /1 G4 ...

Back when there was an M6 macro I was able to adjust the dwell time between manual tool changes, so that the spindle had time to spool up before cutting. I am trying to find out how I can do this now easily. Not sure if anyone has a copy of the old M6 command from 4.10.

Hi All - Everything has been going great until the other day. I'll try to be quick. Acorn Rev 3, CNC Mill Pro 4.12, Gecko 540. I'm experiencing stuttering on certain moves that will/can get violent. I've checked the wiring on the controller, tried multiple gcodes, used known working gcode. I am not ...

Bang!!! Thank you so so much. That is exactly what I had started doing versus having it on the hard drive. Excellent news for me, thank you again!!!

The issue after reading is that when hitting tool check, and it foes to the run screen menu, there is no option to resume job.