Search found 2193 matches
- Sun Dec 17, 2017 1:01 am
- Forum: Success Stories
- Topic: Grizzly G0752 Acorn Retrofit
- Replies: 7
- Views: 5322
Grizzly G0752 Acorn Retrofit
Guys... Here is some shots of my first Acorn build. A Grizzly lathe I have used for about 5 years. I have always wanted to convert it to CNC, but I hadnt found any decent lathe CAD/CAM software. Sure some that would work for CAD, but seriously lacking in the CAM department. I bought my first Acorn t...
- Thu Dec 14, 2017 2:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Control Questions (Lathe Tailstock Limit Switch setup)
- Replies: 8
- Views: 2918
Re: Control Questions (Lathe Tailstock Limit Switch setup)
Last question on this item... thanks for the previous good info.
Is there a software (soft switch) limit override or will I need to provide a momentary physical switch to back off the triggered limit?
TIA, GC
Is there a software (soft switch) limit override or will I need to provide a momentary physical switch to back off the triggered limit?
TIA, GC
- Wed Dec 13, 2017 7:34 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Control Questions (Lathe Tailstock Limit Switch setup)
- Replies: 8
- Views: 2918
Re: Control Questions
Scott... Thanks for the info. I will post my scenario as it could help someone in the future. My current build is a G0752 lathe. I am using npn inductance proximity sensors, 3 of them. One is on X+ (home towards operator), second is on the Z+ (home away from chuck). The third is located to prevent t...
- Wed Dec 13, 2017 12:24 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Fried VFD and Acorn
- Replies: 22
- Views: 8444
Re: Fried VFD and Acorn
Plus 1 to the GS2 VFD's. Easy to program and good IO options. Reasonably priced. Single phase input options to 3hp. I use about 20 a year almost exclusively. One exception is that Yaskawa has a model that is single phase rated to 5hp. I will look up the model number and post it, if needed
- Tue Dec 12, 2017 3:33 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Control Questions (Lathe Tailstock Limit Switch setup)
- Replies: 8
- Views: 2918
Re: Control Questions
Thanks Scott...
I may have not asked the first question clearly. See attached photo... Since there are different selections, I assume different actions. Any docs?
I may have not asked the first question clearly. See attached photo... Since there are different selections, I assume different actions. Any docs?
- Tue Dec 12, 2017 12:56 am
- Forum: Centroid Acorn CNC Controller
- Topic: Control Questions (Lathe Tailstock Limit Switch setup)
- Replies: 8
- Views: 2918
Control Questions (Lathe Tailstock Limit Switch setup)
A few newbie questions if I may... Can someone direct me to the documentaion regarding Wizard settings of inputs (mostly) and outputs (a little)? For the most part they are self explanatory, but I am sure that the control handles some of them differently than others and if so, see what those differe...
- Sun Dec 10, 2017 9:46 am
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: OAK Spindle speed issues <<Answered>>
- Replies: 7
- Views: 2940
Re: Spindle speed issues
Tom... In the AC drives I am familiar with there is a parameter that uses a percentage +/- 100% to allow the user to adjust the internal workings of the drive to sync with the output of the control board. These are called by different names, but "Analog input Offset" and "Analog Input...
- Sat Dec 09, 2017 9:09 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Phoenix Bulkhead Connectors
- Replies: 1
- Views: 1281
Phoenix Bulkhead Connectors
As requested from another thread. Phoenix COMBICON DFK-MSTB series connectors. I purchase them from Digikey, but they should be handled by your favorite electro-supplier. To see the whole line, I enter the series name in the search bar (in red) and in most cases the complete line is returned. These ...
- Sat Dec 09, 2017 8:56 pm
- Forum: Centroid Acorn CNC Controller
- Topic: So you bought an Acorn....or are interested in one.
- Replies: 31
- Views: 12622
- Sat Dec 09, 2017 4:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: So you bought an Acorn....or are interested in one.
- Replies: 31
- Views: 12622