Centroid Community CNC Support Forum

This may be off-topic for this forum, but I've ordered a DMM DYN4-H01A2-00 driver and a 86N-DHT-A6MD1 servo to use with my ACRON board. I received some input power wiring diagrams from DMM showing the proper add-on componests to use to connect the drive to 3-phase and 1-phase 240VAC, but nothing for...

Gary, Thanks for the quick reply. The step and direction signals worked properly with the (+) end tied to +24VDC and the (-) end connected to the corresponding step or direction H2/H3 connector. The Enable signals worked properly when connected in parallel through the E-Stop switch per the schmatic....

Dave, Thanks for the info on the alarm circuit. The Centroid schematic for multiple ClearPath motors shows that the HLFB circuit is daisy-chained with the 1st motor's RED conductor tied to GND, it's GREEN conductor tied to the 2nd motor's RED conductor - with the same daisy-chain for additional moto...