Centroid Community CNC Support Forum

Excellent timing, Fredsan! Today I have been connecting up my touch pad for tool lengths (NO) and also a butchered Renishaw MP1 probe for work probing (NC). So you have saved me hours of grieving and trials. The touch pad works of course but without your changes the probe isn't about to do anything ...

Keith - you say "wire the other three switches in series with the Estop with a momentary override" - do you mean to wire in a push to test switch that will take the e-stop line down to ground so you can move away from the limit condition? Trying to understand how to implement this - sounds...

Dunno why the secrecy! The one shown is a Dell - but Dell doesn't seem to make it any more. Presumably Centroid have a load in stock still. I found a used MSI Pro 24T 6M on ebay (UK) for £400 - works nicely so far. https://www.msi.com/All-in-One-PC/Pro-24-6M.html I see that Shuttle also make a nice ...

Hi Scott Sorry, I should explain. I have 2 electrically selectable ranges. If the spindle speed needs to be 1000rpm or higher, it needs to select the high range. Below that it needs to be the low range. So the controls would select the correct output status (high solenoid or low solenoid) before ena...

Keith - any suggestions on the gear selection? Would I need to get into PLC programming to automatically select the correct gear?

Thanks

Hmm. You wouldn't be standing in front of my machine with a belt and pulley in your hand for long. The head is a solid cast iron thing, full of gears with a large power drawbar on top, so not much chance there I'm afraid. It was a major job just to get sensors onto the bull gear. If I can't generate...

I have the same issue, as I posted at the weekend (no reply yet). There are differential line drivers that should do the trick like this: http://www.shop.cncdrive.com/index.php?productID=259 . Datasheet here: http://www.cncdrive.com/downloads/Diff_line_driver_manual.pdf Are there other alternatives ...

My Shizuoka has a 2 speed spindle with solenoids to select high or low ratio - and switches to indicate which range is currently selected. Rather than having to manually select the range and let the Acorn (in my case) see this from the switch inputs, is there a way to use one or two of the outputs t...