Centroid Community CNC Support Forum

You must connect the drivers to the PC using the driversoftware to change the settings in the driver in which case ALM is triggert. Uwe Really? So what your thinking is there are settings that are not available by default, correct? From what I remember about my drives is that there was no programmi...

Guys, Ive confirmed with Marty that my drive ALM fault wiring is correct. Im looking for any input on WHY IF im missing steps the fault alarm is not being triggered? I know see the value in this circuit and I want it work. To test it again, with the goal of trying to fault out the drive by running t...

When it comes to actual lathe operation I have to defer to those with more experience than I. cncsnw, Uwe and Tom have given you some ideas. You do have to learn to program the part correctly. The machine likely did exactly as you programmed it to. Marty Yes it did my feeds and speeds were to fast.

I want to paste this into Intercon, right in software instead of having to paste into the code text file? I see insert G&M code but it seams to only allow one line at a time? Every time you edit the CAM you need to Re-paste into the text file its a PIA. ; ( Can I do this? (Bills Edited Version F...

Can I add this to my program right inside of Intercon as I program a part using Insert F3, Other F10 G&MF2 code?

Thanks Uwe, I like the added notation in the control, IS the M200 what calls this up? I would like to add something like that. I got this code from Karl at Sherline, I got it working its so cool!! however had to omit (M6) as it was hanging up there. I looked at the list of CNC12 M Codes and there is...

I program them in profile and cut off cycle. Uwe Is there an option to chamfer on a non cut off sides of an edge/s. ? I realize this dose not really make sense as a function of a cut off Machining operation but just a thought, a way to cheat the system. ? in Intercon, use Groove instead of CutOff c...

suntravel wrote: ↑Sun Aug 21, 2022 3:05 am I program them in profile and cut off cycle.

Uwe

Is there an option to chamfer on a non cut off sides of an edge/s. ? I realize this dose not really make sense as a function of a cut off Machining operation but just a thought, a way to cheat the system. ?

From your logs (F7 Utility, F9 Logs, F1 Errors) I see the drive fault. So your drive ALM are wire correctly (1) 08-20-2022 17:04:34 199 CNC Started (1) 08-20-2022 17:04:45 CNC12 Lathe v4.64 (4) 08-20-2022 17:04:45 9033 Reset Initiated, Press Reset to Clear (4) 08-20-2022 17:04:48 4032 Reset Cleared...

From your logs (F7 Utility, F9 Logs, F1 Errors) I see the drive fault. So your drive ALM are wire correctly (1) 08-20-2022 17:04:34 199 CNC Started (1) 08-20-2022 17:04:45 CNC12 Lathe v4.64 (4) 08-20-2022 17:04:45 9033 Reset Initiated, Press Reset to Clear (4) 08-20-2022 17:04:48 4032 Reset Cleared...