Centroid Community CNC Support Forum

Hi Marty Yes only happens when I turn off the power. I not saw the motors twitch during the bench test. I moved the table to the center of the travel ( X and Y ) and did the same. I attached he type of motors I have, the only one I don't is the DYN4 driver and motor. Marty do you please post here th...

Is DYN2 and I use the wire diagram of ACORN EVE 170630 PN:14445
did you watched the video?

https://youtu.be/3nEBN8MVkz0
Try see now please
Thank you

Marty
I try post the video here and I don't know why not let me do If you can give a email I can send by email to you, sorry.
Thank you
Wagner Damotta

I make a video tomorrow and after I post here
Thank you

Hi Marty I forgot one thing that my machine do every time I turn the power off, soon I turn the power off in the control box the X and Y move like something hold back, this is normal or I did something wrong? If you want I try make a video about the X and Y. Tomorrow I going to try find out the back...

Hi Marty and Keith I did the update to v4.18 and I going to send a new report to you too, I need know how I find out how much backlash I have in my machine and how I correct it. Marty I have AC servos DMM and my servos is connect direct to the screw, I watched lot videos from you and Keith and I lea...

Hi To all
I think that I did all the adjustments but I don't know If I did right, I have backlash and I have to fix it before start the use the machine correct?
I send the last report too, I like know what more I have to do before start use the machine.
Thank you
Wagner Damotta

Hi Ken Rychlik
Thank you Very much for your info about the proximity sensor's, I installed on my machine by your diagram and work very well.
Thank you again
Wagner Damotta

Thank you Ken Rychlik
I going to try install the sensor"s this end of week and after I post here the results.
Thank you again
Wagner Damotta