Centroid Community CNC Support Forum

How can i turn off the encoder to one axis so i can work with the tuning without getting the position error all the time?

I did put those values in and i got the servo vibrate and it did not stop after a jog move forcing me to use the E-stop. Did not have time to play around with it more, so i will do some more testing today. Any idea what to do when it vibrate but not moving? Screenshot_20210903-095239_Gallery.jpg The...

How can i get the axis header to output +-10V?

You are right, i have fixed it now.
Now my problem is getting the +-10V to drive the servo...

I can't get the axis to move at all, i don't get any output to drive it. What leads do i use on the flying leads axis header? Do i have to do more then activate output 15 and 16 to get the +-10V to the servodrives?

Did get this to compile

What is going on here? Did not write anything on those lines??

If i remove the fault out from the vfd all works perfect.

Do i have to set some delay on the spindel fault also?

this is the relay i use:
https://www.phoenixcontact.com/online/p ... usen&tab=1

Here is a drawing of the wiring diagram

Hello everyone, I need some help getting my cnc retrofit project to work. The machine is an Eumach MC-800P retrofitted with OAK and using the Oem Simodrive 611 to control the servos and the spindle. the servos is fitted with centroids 10000line encoders. For now i have the servos not attached to the...