Search found 3864 matches
- Sun Apr 21, 2024 11:29 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: dxf import
- Replies: 7
- Views: 321
Re: dxf import
By "a real point", I assume you mean known numeric coordinates (presumably in the drawing, relative to the drawing's zero point). I do not know of any way you can just enter such an offset. The best approach, if you cannot get the CAD coordinates to be where you need them, is probably to j...
- Sun Apr 21, 2024 9:28 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Hardinge CHNC4 Retrofit
- Replies: 180
- Views: 76832
Re: Hardinge CHNC4 Retrofit
Did you look at the Z motor power wiring, to see if you can find out where the 63 Ohm measurement came from?
- Sun Apr 21, 2024 6:39 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Acorn won't run g code/mdi < lathe G98/G99?>
- Replies: 19
- Views: 340
Re: Acorn won't run g code/mdi
Instead of a copy of your license file, try posting a current Report file from your control. Use F7/Utility -> F7/Report to create one. The file name will begin with "report_", and it will have a ".zip" file extension on it.
- Sun Apr 21, 2024 3:19 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Hardinge CHNC4 Retrofit
- Replies: 180
- Views: 76832
Re: Hardinge CHNC4 Retrofit
I measured the Z axis motor which is fully operational and the red to blk was 1.9 ohm red to gnd 63 ohm - this surprises me...2x blk to gnd 63 ohm That is very odd. I would have expected that to blow the Z axis of the drive as soon as you tried to put power to the Z motor. There should be a 3-posit...
- Sat Apr 20, 2024 6:35 pm
- Forum: Machining Strategies. Work Holding, Tool Path, Cutters, Feeds/Speeds etc.
- Topic: dxf import
- Replies: 7
- Views: 321
Re: dxf import
I don't see anything wrong with the file.
I was able to read it in CNC12 offline/demo v5.00.
What CNC11 or CNC12 software version are you using?
I was able to read it in CNC12 offline/demo v5.00.
What CNC11 or CNC12 software version are you using?
- Sat Apr 20, 2024 6:25 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: With the Atc option, Can we run without the ATC
- Replies: 6
- Views: 314
Re: With the Atc option, Can we run without the ATC
Yes. A good starting point is to set P6 = 0 and P160 = 0. Beyond that, it mostly depends on your M6 macro and your PLC program. If your M6 macro does not recognize P6==0 and fall back on manual tool changes, then you will need to temporarily delete or rename it so that CNC12 just uses the default ma...
- Sat Apr 20, 2024 2:37 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 290
Re: +\- 10vDc PLC spindle code for ALLINONEDC
My complete Allin1DC basic mill PLC program is attached, for reference. I use Parameter 178 bit 2 (+4) to select bipolar analog.
- Sat Apr 20, 2024 2:36 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 290
Re: +\- 10vDc PLC spindle code for ALLINONEDC
Rigid tapping is not a factor one way or the other. To do tapping, you need to be able to make the spindle rotate forward and rotate reverse, at more or less the requested speed. It does not matter whether reverse rotation is accomplished with a bipolar analog signal, or with an alternate "run&...
- Fri Apr 19, 2024 6:27 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: Hardinge CHNC4 Retrofit
- Replies: 180
- Views: 76832
Re: Hardinge CHNC4 Retrofit
Do you mean INP3, on the Alt-i display on the computer screen, is flickering between green and red? Or do you mean that a physical LED on the Allin1DC board, which happens to be near the limit defeater DIP switches, is blinking? If the latter, that has nothing to do with the limit switch defeaters. ...
- Fri Apr 19, 2024 5:19 pm
- Forum: Centroid Oak, Allin1DC, MPU11 and Legacy products
- Topic: +\- 10vDc PLC spindle code for ALLINONEDC
- Replies: 5
- Views: 290
Re: +\- 10vDc PLC spindle code for ALLINONEDC
Assuming you only want to use it for speed control, then that should work (output a value from 2048 to 4095 for 0V to +10V). My standard code is like this (having previously set "SpindleAnalogBipolar_M" per a parameter selection). ;Convert RPM to 12 bit value IF True THEN TwelveBitSpeed_FW...