Centroid Community CNC Support Forum

the 65 came with one of the shopbot controllers so it should be good

If I bumped the stepper power supply up from 48v to 65v would that help with the speeds

Thank you that worked now everything is working as it should. It is so nice to have a controller that I can rely on. The only thing I have to do now is get the sweet spot for my G28 moves. I am running at 350 IPM I tried 550 but that was to fast and I lost steps. I will try going up about 25 IPM at ...

I tried to change the noo4 but it will not go to 2 when I use the arrow key

The only issue I have now is the speed control for the spindle doesn't work. I have A Yaskawa Varispeed V7-4X

Boy what a difference this is all those problems are behind me now and I can actually use the controller. I ran 2 jobs today and had now problems at all and it only took me a couple of minutes to get them to run. Before it was like 30 0or more to get it to do what I wanted.

Shawn you are correct about me using Vectric have been using Aspire since before it was officially released. I am happy that I haven't had the problems that I had before. board now powers up every time and no glitches when the spindle fan starts.

I see on Marty's cnc garage that when he is running a file that the trail has a large dot. Mine only has a small dot that is hard to see how do I enlarge the trail dot

I did redo all the connections I actually think the power supply was a little on the weak side as so of the problems I had ongoing are now cleared up. Such as not always starting up and the limits not always working.

I just got my new Meanwell power supply and board lights up and I have communication with the computer