Centroid Community CNC Support Forum

Hello, I have done so e tests, and I have some issues with the KP-3. During a digit process the controller stop after 6-8 proping moves and stop without any displayed errors. After pressing any key of the keyboard the process start and stop again. Any idea what's happened? Thanks is advance Mathias

Hello,

thanks for your advice!

Perfect support form you!

My probe with serial no 1231 is the new version, and need no refit.

Any advice from the feetrates for the digitizing an useing the 4th axes?

Thanks in advance for your reply.

Mathias

Hello all,

everything is okay and it works nice.

One question, can you advice me the speed for the fast and slow feedrate for a KP3 for the feedrate?

Can I probe parts with the 4th axes?

Thanks a lot!

Good mroning,

many thanks for the reply!

I will check it and try it again.

I ther any electronic inside of the probe and with critical parts after connecting to wrong terminals?

Please see attached report.

Kind regards

Mathias

Hello all, today I receive my brand new KP3 and I cut the original cable to solder a small plug for the connecting box. I do the complete wiring and nothing works. I this possible that the cable change the color of the wriing after the heat shrink tube? Hope I destroy not my KP3. Thanks in advance f...

Hello all.
last days I order the KP3 probe and the upgrade digitizing software.

I have two questions to the system.
Is it possible to digitize with the 4th axle?
And can I program rough cut without an additional CAD/CAM Software?

Thanks in advance for your answers.

Best regards
Mathias

Hello All,

ist this possible to use one WMPG with two receivers for a mill and lathe?

I never use both machines at the same time.

Thanks in advance for your reply!

Kind regards

Mathias

Hello,

many thanks for the reply!

I have done some additonal test regarding with your advise.

Work well!

Mathes

Hello Centroid team, I am close to finish my Deckel FP1 with your system, after using PCDREH (German system) over 20 years. Last days I start some test, the machine runs well without bigger issues during the converting. I have some question or ideas: - I it possible for the Z axis to implement a sec...

Hello all, I am really satisfied with the Acorn controller and my lathe, but my main issues are around the tool offsets. Can someone give me an advice for test procedure to arrange a test method to avoid broken tools? Yesterday I build me a own touch probe for the tools and after testing I crack a I...