Centroid Community CNC Support Forum

I know you are getting frustrated but maybe it's time just to start from scratch with your settings. Break it into sections and get each section working correctly. Reduce your max speed settings until you get the correct operation of the machine to give yourself more time to react to hit cycle stop ...

When I save the G30 settings to machine Z 0 then home the machine, that is when I notice the G30-Z value is being over-written with the G30 X value. If I save the G30 settings, then exit, restart CNC 12, then home, that is when I notice the over-write of G30-Z. It could also be over-written when zer...

If you hit Ctrl+P while in the wizard it will generate screenshots of all screens. Print to Windows PDF and save, then post PDF file here.

During re-calibrating my machine auto-square from prior issue, I discovered the following issue. I use G30 for my tool touch off plate to measure tool Z-Offset. The G-30 Z value is being over-written at what I presume machine homing or Z part zero to the Y value. I have been able to repeat the condi...

Installed 64 bit 5.07r14 last night, went to test cut today and ran into a slight problem Router with paired 2 & 4 axis autosquare, had to re-home and ran into an error with Y-travel exceeded, homing operation was interrupted, unable to move off of limit switch with MPG or VCP, exited CNC12, pow...

I ordered an Ox Laser module 5W from Amazon and made a mount on my dust shoe for easy mounting when I use it. Everything is packaged on the laser module (no additional boards/controls) so I just have a 4 pin molex near the spindle that I plug into the unit's pigtail, then use the mean-well power sup...

Glad you got it isolated and fix on the way.

Check out Drillman1 on ebay, they have various countersink endmills. Not sure what CAD/CAM program you are using, with Vectric V-Carve you could use one of his inexpensive 1/8" endmill or ball nose endmill for tapered countersink.

Joey, I tested the WMPG more this afternoon. I tried to take a video but wasn't able to hold the phone while holding and operating the MPG. I'll try to explain what I validated today in testing. With Z limit enabled in WMPG settings in Wizard, When you use the jog -/+ buttons on the WMPG, the 100x m...

One other item I noticed on the WMPG jogging is the setting for Z speed limit Zx100=Zx10 does not appear to limit to x10 after homing and prior to Z-zero . The Z movement with the WMPG set on 100x is 100x speed until you touch off the z reference ( Bed or material ), then appears to function correct...