Centroid Community CNC Support Forum

I'll figure out something
I'll probably reinstall the Shuttlexpress and just use it if it does not hang up also.
Steve

It took probably over a 200 clicks of the left mouse button but it is still sticking. That is my problem I never know when it will happen. When it happens I'm so close to the part it crashes before I can react and stop it. I might reinstall the Shuttlexpress and see if it has the same problem with r...

Arduino divided the step count of 1 revolution of the turret into 8 positions. There 33800 pulses per 1 revolution of the turret.There is 1 slot in a disk that sends a single index signal to Arduino each revolution right before tool 1's position. Every tool position count when Acorn requests a tool ...

Marty I did do all of this: "I do know one thing, I would have created fresh reports, gotten screen shots of my 4.18 Wizard settings. I would have printed the report with the parameter settings, I would have copied the 4.18 CNCT directory to a USB drive, then renamed the current CNCT directory ...

The turret and Acorn are working perfect and are very accurate to within .0002 making multiple identical parts. This is the only problem I have left and I did switch from v4:18 to v4:64. this was happening when I first installed Acorn before windows updates and before i updated to v4:18, before I ev...

I had typed the problem was still there before I realized I had not restarted Acorn
after the restart I have not made it happen again. so we may have it...
I'm out of time today but I will be testing tomorrow morning
Marty what other things did you notice?
Steve

I forgot to shut down and restart acorn and re-power the board after changes I rebooted everything now and will retest
the report I sent was after the reboot so it should include the changes.
Steve

the problem still exists on both axis if your trying to replicate this you will have to try a long time and maybe click at different rates to get it to happen and if it does and you clicked again you caused it to stop moving. you have to watch close before clicking again. it always happen when movin...

I did what you said to do and I'm testing now
Steve

It probably has nothing to do with the setting in advance drive setting because X does the same thing and it is not inverted in advanced settings.
Steve