Centroid Community CNC Support Forum

Yeah, I get that. Does anybody have any recommendations on a computer. Preferably a mini that I can put in my cabinet like now. I would like it to have dual lan ports like the one I have now. One for network and of course one for the corn aboard. Here is a picture of my machine and cabinet. Thank yo...

The computer I am using is a mini pc, core i3 at 1.9 GHz 8 gigs of ram. with a SSD, Is that not adequate?

That could very well be the issue. I know it ran fine with mach 3 but I know that is completely different as well. Thank you for pointing that out.
Bill

Ok, Here are both the report and the test file I was using. I hope this is what you need. I am totally new to the acorn board and software. I know this is a strange file because is has so many passes. It was a file that I used the create a counterbore in aluminum at .01 per pass. But it really doesn...

Hello all, I seem to have a problem when I use the g code view as opposed to the graph view. When using the graph view all seems smooth an the way it should be, however when I use the g code view, turn the graph off at times the machine halts and is very jerky almost like it changes to exact stop mo...

It seems to be working correctly now after a reset. Thank you
I will post again if there are any issues I'm not sure of.
Bill

Ok, so if they are NO in the axis pairing manual is shows as you said that I can parallel the x,y and z together. The y slave will have its own input but in the available input labels it does not show a slaved y axis option in cnc12 version 4.64. What option would I use for these inputs? Actually. I...

Thank you for your reply. I agree about the basic info. In testing them the blue output wire has 24 volts on it without the presents of a magnet. When the magnet is placed in range the voltage goes away. I was thinking that they are NC but maybe I have it backwards.

These are the sensors on my machine. https://www.digikey.com/en/products/detail/55110-3H-02-A/55110-3H-02-A-ND/565512?utm_medium=email&utm_source=oce&utm_campaign=4251_OCE21RT&utm_content=productdetail_US&utm_cid=1917010&so=70536825&mkt_tok=MDI4LVNYSy01MDcAAAF-CT_gP8NMr75AELs...

Hello all. I am new to the acorn world and this forum. So far setup has gone well. I do have a question about setting up 4 Hall effect home switches. These are normally closed so I have them wired up to the 24 volt tap. As for the switch output wires. Do they all need to be connected to separate inp...