Centroid Community CNC Support Forum

Good afternoon noon Keith, I received the boards today, it looks like I have everything except I need 2 green connectors. I have one included that goes to the power supply, although I need one that’ll hook up to the plasma cutter voltage etc

So adding the 5:1 gear box reduces the work the stepper motor has to do and gave you better cuts!! … I’ll have to look to see if I can find them and see what it’ll take to convert! I do have a question. When I get my acorn board I want to get another stepper driver and run the 2 Y axis motors separa...

Movement Range, Standard Model: 485mm x 500mm x 95mm (19”x19.6”x3.75”) Movement Range, XL Model: 890mm x 890mm x 95mm (35”x35”x3.75”) X and Y Rail Dimension: 100mm x 60 mm with up to 8mm thickness (3.94” x 2.36”; up to 0.315” thick) Z Rail: MGN15 Linear Profile Rails Bearing Wheel: 40mm Acetron (1.5...

Here is my shared folder link

https://drive.google.com/drive/folders/ ... s=614bbe35

cnckeith wrote: ↑Thu Aug 05, 2021 5:49 pm We cut this today.

Are you using/integrating an ohmic sensor in the THC?

we are working on it.. lots of little details to get right! We shipped three THC kits to Beta testers this week, and are getting ready to send them beta software to go with it! How do I become a beta tester, I really want to stay with centroid for my plasma cutter I have the acorn for my Bridgeport

I have a millright mega v plasma that has a garbage Cnc controller! I built a Bridgeport series one Cnc with the acorn and cnc12 pro (I believe it’s cnc12) and it just works! I want to add a acorn to the millright but have been waiting for the plasma version to come out! Question 1. If I buy the cen...

Can you use closed loop steppers and hook a DRO to the z on a acorn (I see there is a input for a DRO) and have the computer compare the DRO to the encoder and auto adjust? If not what’s the DRO input for? Also Does centroid offer a manual for acorn and cnc12 mill pro? This would help me with quest...

Can you use closed loop steppers and hook a DRO to the z on a acorn (I see there is a input for a DRO) and have the computer compare the DRO to the encoder and auto adjust? If not what’s the DRO input for? Also Does centroid offer a manual for acorn and cnc12 mill pro? This would help me with questi...

I see I misread the original post. He is not asking about setting part zero; he is asking how to compensate for the 2" height of the manual setter when measuring tool height offsets. The answer is, you don't, and your don't need to. Set Z Reference using your reference tool, on top of the 2&qu...