Centroid Community CNC Support Forum

Glad that it runs now smooth.

Resonance is maybe from the belt, try to get a bit more tension.

Uwe

Not now, should have looked closer...

https://alibre.info/kontakt.html

Uwe

0.012359x1618 Steps=19.997

One step more would be 20.009

There is no way to drive to 20.000 and CNC12 is going as close as your setup allows

Use gear reduction or setup to a higher resolution.

Uwe

Here is one in the USA https://www.ebay.de/itm/195612559122?chn=ps&_ul=DE&norover=1&mkevt=1&mkrid=707-134425-41852-0&mkcid=2&mkscid=101&itemid=195612559122&targetid=1405537545098&device=c&mktype=pla&googleloc=9044003&poi=&campaignid=20647985696&...

cncm folder cnc-x.tab for x and so on.

Uwe

You have set up 9.8872mm / 800 steps = 0.012359 mm / step So no way to hope the axis will drive with 0.001mm accuracy The smallest increment the CNC can control with your setup is 0.012359mm Related reading: https://centroidcncforum.com/viewtopic.php?f=63&t=1801&p=11936&hilit=happy+zone#...

Alibre is a German product, and they are also cooking only with water... Expert version one time 1904 € + Service/Updates 690,20€ / year IMHO fusion is a better deal for 490€ / year (the price I payed for the abo next 3 years) more modelling features and 3+2 axis CAM included I like the streamlined ...

Reset Logic was always different in Acorn than in Acorn6.

But since I cycle reset after start up, I did not mind it.

Uwe

There are some threads here with problems using DMM servos as spindle drive, but nobody posted a solution...

Uwe

It runs like this out of the box?

Should speed up smoothly.

Did you check if there is a voltage fluctuation when 0-10V is connected and servo running?

If yes you need a snubber circuit:

https://centroidcncforum.com/viewtopic. ... uit#p53742

Uwe