Centroid Community CNC Support Forum

Thanks a lot i worked on cnc pipe bending for which i need this
Will share pics and videos once completed

Hello Guys
I need a Zerospeed signal in yaskawa sigma5 or sigma2 Drive in Zaxis .Any idea how i can configure any output of yaskawa sigma5 or sigma2 .
Or any possibility how can i make in centroid plc?
Aamir

Ok i will try But in G92 has any possibility for chamfer at end ?

Person use G code only .

Velocity mode is more precise and 100% close loop update error on fly. I did my 600+ installations on velocity or torque mode. Precision or Position mode did not based on error no PID algorithm. I prefer and love to do retrofit on either velocity or torque mode only. Currently centroid may launch Hi...

Hello Guys
My part didn't have a under cut at Z-10mm when thread End it made a round step which not required .
Also we didn't want any undercut all
Any possible solution?
Thanks
Aamir

Hello Guys
Finish Hurco BMC25 with Acorn .
https://youtube.com/shorts/HvSV0ad-KXc?feature=share

Aamir

Hello Guys
Recently completed Dekel DMU-80 .

For professional retrofit ,consultancy and services contact me
aamirzaheer4@yahoo.com
Aamir Zaheer

when press estop the out9 must be off 1st to hold and then servo off . Servo off logic need to be change by centroid. I have similar problem i used relay output for servo Enable and made custom logic ,1st brake applied and then 50ms servo off keep in mind work for velocity and position mode only not...

Hello
When will centroid launch or have any plan to use absolute buffer type encoder as a standard in oak to eliminate limit switch .Most of the new m.c has no limit switch .
They are using buffer type absolute encoder as a standard.
Thanks