Centroid Community CNC Support Forum

Hello
Did retrofit 4years ago on a Mazak lathe superb result and still workiperfectly


Thanks Centroid for producing a good product like Oak board .

One more thing I noticed in precision mode default break logic works but not in Velocity .As I preferred closed loop I used only velocity and torque and may be in future EtherCat

Hurco VM2 has 16mm pitch If I remember .I have a similar Deckel Maho m.c with the same problem I changed the servo On and break Logic as follows 1)I switched ServoZ_On on relay out9 Servo On seq 2)when SV_PC_POWER_AXIS_3 Is high then I on ServoZ_On and release the break after 100ms Z Servo off 3)whe...

Hello
I need to home in acorn through Z phase output in yaskawa sigma5 what is the name of signal

I also have the same problem but i switch the Drive from Normal Pulse train to Hi speed pulse input in one of the chinese Dorna Drive that resolve my issue .

Keith
I am willing to use hickory with some of the chinese Drive like dorna

Our customer used AutoCad for drafting and export dxf to CNCkad for Gcode and i developed a custom post processor for this
Aamir

Hello Guys
Just Finished Finn Power TP4020 with centroid. Oak+PLCADD1616



https://youtube.com/shorts/FGd4Vu3P7GM?feature=share
Aamir

Hello
I need to make a Custom code of M35 P200
I want to pass that P value to any system variable to use it what system variable it stores ?
Any idea?

Jeron
Haas Drive look like a serial link and could not able to use it .But you can use yaskawa motor with sigma5 or sigma7 drives