Centroid Community CNC Support Forum

I just install a new centroid 16inlb motor on our 4th axis. I am getting a stall error because the brake does not release quick enough and the motor starts to try and turn thus throwing a stall error. Is there a parameter to have a slight pause like 1/2 second delay after the brake release before th...

It's no longer on Youtube and I can't find it on my computer ??? Not sure what happened

Here are links for 2 Youtube Videos:

SW Pennsylvania. My phone number is 814-521-8486

Started this project a few years ago and then had a hand injury that required surgery. It complete and running except for the turret. The turret can be manually changed from tool to tool right now and that's how I used it for a couple of parts. I do have a new servo, motor controller, and power supp...

Update,

Swissi Has fixed this issue. THANK YOU Swissi !!

Here is a program sample when not using Tool Optimization OR it posts like this if I manually insert a Tool Change in Fusion even though its the same tool. (2D Contour11) N15000 M9 N15005 M1 N15010 T1 M6 N15015 T3 N15020 S2690 M3 N15025 G57 N15030 M11 N15035 G0 A0. N15040 M10 N15045 M8 Here is what ...

Keith, I have tried this post. It does the same thing. I’ve tried PM Swiss and haven’t received a reply.

I am running a multi work offset post on a 4th axis. When posting I get a work coordinate call out (Like G57) which is on a different angle but no M10, A#, M11 afterword. So the 4th axis does not rotate to the new coordinate. This happens when there is not a tool change at the same time as the work ...

I did get the rotary table hooked up this morning. Everything seems to be good and tuned correctly.

Now can anyone tell me how I go about setting up the air brake solenoid. are there parameters or is it PLC programming?