Centroid Community CNC Support Forum

The manual states VCP 2.0 will be available for Allin1DC. I attached photo of info of my machine. Is it available yet?

So I have been wondering and I haven't seen the answer to countryguy's original question. If you move the knee after initial tool setup and have to replace a tool, Do you somehow have to move the knee back to the original position to get the new tool to " compare it to the reference tools origi...

When I first started using my machine, after loading a g-code program and pressing F5 (edit), notepad++ would open but now just notepad opens the g-code. What controls this button? I don't remember changing anything.

I want to get up and running for now So you recommend temporarily wiring the VFD similar to this except for the fault reset which is out 5 and is currently used for speed up valve. I'll change to option two at a later date.

So do you take the variable speed system off or "calibrate" it somehow to match the VFD ? Somehow I would think it has to be set to close to 1-1 ratio.

cncKeith What do I have to modify to get my BOSS PLC to work using the BOSS pneumatic control? Mainly the original speed pot and out 4 and 5 speed up/dn (See Screenshot of schematic)? I have a VFD but mainly so I can run single phase current. Can the PLC adjust the variable speed pully automatically...

Yes thanks for the clarification. Thats exactly how it’s working but how would someone know that without your post explaining that. Thank you.

I am just trying to understand why output 9 wasn't cycling when I was turning the spindle on and off so I can complete the wiring and plumbing of the brake air valve correctly. As I understand from your post, I have to press Aux3 to "enable" auto spindle brake? Output 9 ON = Brake OFF

report_0311192178_2019-06-06_20-04-02.zip I don't see my Output 9 (Auto Spindle Brake Release) turning off or cycling while I have the I/O screen enabled (Alt+i) when I am turning the spindle on / off with the VCP buttons. I also tried MDI M3 & M4. The enable output turns on and the fwd out put...

So I just watched Marty's video on setting up limit switches. My BOSS machine has separate switches on X, Y, and Z for home and ONLY ONE EOT on X and Y axis. Z axis had a + and - EOT Switch. The home switches are close to the EOT switches on each axis. Do you recommend using the original home switch...