Centroid Community CNC Support Forum

sorry for the confusion, probe is connected ok. Looks like on my mill with NC probe.

But I can not test autosquare, because I have no router.

Uwe

I check on my machine later...

Uwe

You can also try first to swap the inputs in the Wizard...

Uwe

You can change it in the Wizard

Uwe

Input 9 should not change when plugged in or not, only if the probe triggers.

You wired Probe Tripped cable to Probe Detect input and Probe Detect cable to Probe Tripped input.

Uwe

916 Unexpected probe contact

probed tripped when a cycle did not ex-
pected contact

Check the wiring/setup of the probe, it is tripped when unplugged

Uwe

Setup / Part / WCS Table / Return

and then set in G28 in machine coordinates where it should go if G28 is called.

Uwe

Sure, that´s no problem with a quality tap.

Uwe

Current Version... % O02222 (post version: 44007) (post modified: 2022-10-25 08:31:11) (T101 NR=0.8 - ZMIN=-48.3 - general turning) G21 G50 S2000 G28 (Face1) N100 T101 M50 G99 G97 S1061 M3 G54 M8 G50 S2000 G96 S200 M3 G0 X60. Y40. Z5. Z0.914 X40. G1 X32.828 F0.2 X30. Z-0.5 X-1.6 X1.228 Z0.914 G0 X40...

Looks ok.

If you have a spindle encoder rigid tapping is easy, but for this small size I would use 2000rpm for aluminum.

Minimum rpm should be 640 or 800 rpm.

Uwe