Centroid Community CNC Support Forum

and if not using fixed tool holders you can do this with Swissi's ProbeApp

Thanks Uwe

Yep - I believe Keith will be duplicating this setting in the Wizard's Preferences section in the upcoming CNC12 v5.08 when released

No probs and pleased you got sorted.

Us old farts are always young and occasionally I need a prod myself

You have your Z axis travel limit set to -141.00 and your error log shows a number of "907 Z axis limit exceeded". Perhaps you need to review and reset your travel limit within the actual machine capability. Home machine / type Alt D to view live MCS rather than WCS ensuring you have Z 0 /...

Hi Keith I've attached 2 files both using 1.75" Aluminium stock to test Mill accuracy. The Intercon version uses a 12mm End Mill (set up in Inches as I use Imperial) and machines a 1.7" square with 1.5" diamond above and finally a 1.5" diameter Boss on top. The Vectric Aspire ver...

BillyBoring, I don't think you need or deserve any help whatsoever. For a supposed 70 year old, you behave like a child but good luck with your project

Just my 2 cents

Thanks for your input. I do understand the concept of using Z-home as the reference. I did indeed try using 2 and 6 for parameter 3 while attempting to use Z home as the reference and could not make it work properly. FYI, I do not see a section 15.3.5 with this heading. At this point, this feature ...

FWIW, a simple way of setting your machine to use Z home as Z-ref is to set Parameter 3 from the default 0 to 2 (or 6 as Uwe suggested to you). This is covered in the Mill manual at 15.3.5 "Modal Tool and Height Offset Control". You then setup your tool height offsets, including the probe ...

Try the documentation link on this Forum. https://centroidcncforum.com/viewtopic.php?f=60&t=3397

The following should help

https://www.centroidcnc.com/centroid_di ... erlock.pdf