Centroid Community CNC Support Forum

I have made several attempts at doing a spindle bench test using the spindlebenchtest.cnc file, following Marty's video. The attached screenshot is what happens when trying to run the program. I uninstalled the Acorn software (CNC12 V4.64/ Pro Router) and did a fresh install, same results. Any ideas...

After going over the Acorn Paring and squaring manual, it looks like using the C86ACCP to pair the axis, is referred to hardware pairing in the manual, I think :!: Using this method, auto squaring is not possible. So I'll just skip using the slave feature on the C86ACCP and use the A axis connection...

I am using the CNC4PC/C86ACCP board to connect Clearpath motors with the Acorn board for a gantry cnc machine. I have the jumper set to slave with the Y-axis on the C86ACCP. Do the motors have to be paired in the acorn wizard and if so how. The only option is to pair Axis 4 with one of the other two...

Hi jpmsteadi, I had a Grizzly G704 that I planned on doing a cnc conversion, which had a 1 hp motor (750 watts). I purchased a 1 1/2 h.p motor from the company that manufactured the motor, which is in China. I noticed that the PMV-30 Mill comes with a 2 h.p motor, this maybe an option for you. I loo...

Thank you!!!

Hi, I going to convert a Avid Nema 34 control system for the Avid Pro cnc router, with Clearpath servo's and Acorn board. I have a couple of questions.... On page 15 of the axis pairing and squaring manual, it says too put a jumper between the Master axis & Slave axis Enable signal. Is this jump...