Centroid Community CNC Support Forum

Actually we paid one hour tech support to centroid friday but it was late in and could not get contact with them, hope monday we be able to contact someone from centroid. Where i can get in contact with Marc Leonard? Just in case i need to, the only thing i need to get this job done is the automatic...

i am watching this video, but idon't know where is the plc program he is talking about, where i can find it?

Mr. Marty

i have my ether1616 card already working now, i have plenty of inputs and outputs, can i use now some of this output tocontrol the ATC and save my 4th axis? i had my 4th axis for ATC before adding the 1616 card, what you suggest me

My cncpc detected the ether1616 card, the problem was windows update, it has been reset and updated, the first time i turn everything back on the 1616 card showed up onthe wizard window.

Yes i did exactlly what instructions say.
What about the A0 address 10.168.41.3 it say cnc12 automatically identify it but where i can see that addres? Or do i have to replace the ip address in the ethernet adapter, now it is 10.168.41.1 wich is for the acorn

this is the report with the ether1616 connected

The card its showing a segment on the display on, when i remove the power from the switch the display shows the number 2 blinking, the green leds in the switch two flashes and the one corresponding to the ether1616 is steady on 20210519_154206.jpg 20210519_154215.jpg 20210519_154242.jpg 20210519_154...

Hi mr. Marty
I have installed a 1616 expansion board to the cnc router, but cnc12 did not detected it, what can i do

in other words, the motor keeps going as long as you have the push button on, when you release the push button the motor stops but always match a tool position, it doesn't stop right away when you realease the button. and yes it can rotate on both directions, in the direction input terminal i can co...