Centroid Community CNC Support Forum

the machine is in production now.

ATC test

that's it, is working now, i had thhe wrong WCS.

what i see now is that the WCS #5 (G58) is showing me on the top of the screen, is not on G54 that's why zeros on all axis, i need too change that to G54

it is fixed now, what i did, on the wizard in homing and traveli changed the automatic homing sequence, and it works i have no idea why that haappen, also the readoouts shows zeros on Z axis when it should show 8.55 on this machine

incputs are working ok the green liight switch to red.
the z axis moves find the sw and retrn tto its position, the x axis is the next that should move but it doesn't,

good morning Mr. Marty today i started cnc12 and pressed the home reset button, the z axis moved to find the home sw. but the rest of the axis does not move and the windows message say ,457 unable to find home, i have no idea what happened, it was homing ok. this is the report report_1442FC0C7608-03...

Can i use acorncnc to retrofit a plasma cnc machine? I know i will need a separated THC

Mr. Marty i have almost everything working on my machine, i just have a question about turinig on and off outputs with Mcodes, some of them doesn't respond when type on the MDI, example: M61 to activate the output 1 of the ether 1616, is there any parameter or somenthing that i have to edit, to ctiv...